General Information
Fulvino is environmentally clean product of plant origin based on natural fulvic substances. Its application includes seed maceration prior to seeding, separate root application, combined application with mineral fertilisers, fungicides or insecticides, and foliar application.  
Fulvino is a concentrated fulvic acid product. Fulvino increases the soil capacity to exchange nutrient ions and to improve the soil structure. This promotes the fertiliser and water use efficiency. It is compatible with most fertilizer solutions and biological or enzymatic formulations. Fulvino is non-corrosive and non-toxic.

Dosage and Application
Dosage:
-separate application 100 g/ha 1 to 2 times per vegetation period
-in combination with fertilisers or micro-elements 50 to 100 g/ha 1- to 2 times
 per vegetation period
-in combination with fungicides 50 g/ha in every application
Application:
Cereals:  50–100 grams of the preparation/ha 2–3× during the vegetation period
Potatoes: Nodule dressing prior to planting: 50 grams of the preparation per 100 l of water
Pre-planting treatment: add 0,5 kg of standard preparation to 100 l in the   
    applicator
Separately or in combination with leaf nutrition: 50 to100 grams of the  
    preparation/ha, 2–3 application per vegetation period
Rape:  50–100 grams of the preparation/ha, 2–3 applications on leaves
Corn: 50–100 grams of the preparation/ha 2–3 times during the vegetation period
Perennial crops:  100 grams of preparation/ha after plant emergence
50–100 grams of the preparation/ha 1–2 times during the vegetation period



Modes of Application:
Spraying on the soil: spray solution on the soil and follow with irrigation
Through irrigation systems: inject the solution into the irrigation system:
Greenhouses: 75 – 200 g/1000m2  per application (4 – 8 applications per season)
Cereals: 0,5 – 1,5 kg/ha per application (2 – 4 applications per season)
Forage crops: 0,5 – 2 kg/ha per application (after each cut)
Orchards: 1 – 2 kg/ha per application (4 – 6 applications per season)
Vegetables (open field): 50 – 150 g/1000m2 per application (4 – 8 applications per season)
Turf: 1 – 3 kg/ha per application (after each cut)
For sandy soils always the higher dosage rate is recommended.
Note: Before application, dissolve in a separate vessel Fulvino in water at a ration 1:50 – 1:100 and then inject into the spray tank.
Foliar application: prepare a solution by dissolving 10 – 30 g in 100 l of water so that a concentration of 0,001 – 0,003 % is achieved. Put this solution into the spray tank.


Seedling treatment:
Cereal seeds: prepare a 2 % solution
Potatoes and vegetable seeds: prepare a 0,1 % solution (dissolve 1 kg in 1000 litres of water) and soak the seeds for about 24 hours in this solution
Compost enrichment: 0,3 – 1,5 kg/m3
Coating ratio for mineral fertilizers: from 2 kg/ha. Mix at a ratio of 1:20 with any MAP, DAP, urea or other products.

Physical and Chemical Composition
Chemical name :                Potassium Fulvate
Appearance :                    Fine flakes of dark brown colour
Source :                    Plant
Potassium Fulvate K2O                10%
Hg concentration                < 0,001 mg/kg
As concentration                < 0,2 mg/kg
Cd concentration                < 0,003 mg/kg
Pb concentration                < 0,01 mg/kg
Cr concentration                = 0,66 mg/kg
Co concentration                < 0,03 mg/kg

Packaging
Available in                     100, 250, 500 g
                        1, 5, 10, 25 kg